After a discussion in a Facebook spinning group about solidified grease in the tips of a fleece, I decided to do a mini study of different ways to prepare a fleece for spinning. I have a fleece of my own that is wonderfully clean but has tips with solidified grease.
On the last wool journey with my wool traveling club, I bought a beautiful NKS fleece. NKS stands for Norsk kvit sau: Norwegian white sheep. This is basically what crossbreds are called in Norway. The fleece I chose had a full year’s growth.
In Sweden most sheep are shorn twice a year, which naturally makes the fleece shorter. This means that the fleece shorn in the early spring is of worse quality (since all the nutrients go straight to the lamb) and usually has more vegetable matter (because the sheep have spent much of the winter indoors). The fleece shorn in the autumn has better quality (since the sheep has no lamb to nourish) and less vegetable matter (since the sheep are out grazing). So: Twice a year gives a better but shorter autumn fleece. Once a year gives a longer fleece but can be more mixed in quality.
The fleece was wonderfully clean and shiny with staples of around 12 cm. The tips, though, were greasy. I think that the Norwegian rain had pushed all the lanolin out into the tips. I washed the fleece straight away by soaking it in rain water. It wasn’t until recently (one year after I bought the fleece) that I started processing, and by then the greasy tips had solidified.
Experiment: Flicked vs unflicked tips
I wanted to make an experiment and compare different preparation methods. First, I prepared the way I usually do with a fleece I want to comb: Loading the combs with the cut ends on the tines and combing three passes, then pulling the wool off the comb in one long top.
Combing this way was a struggle. It took a lot of muscle power to get the combs through the wool. And after three passes it was not nearly in a condition I could approve (I always do an uneven number of passes so that I pull the wool off the combs from the cut ends). So, I did five passes. Pulling the wool off the comb was also difficult, the wool was still uneven with bits of solidified gunk left. I picked as much of it out, but there was still stuff left when I spun the top, which of course interrupted my spinning flow.
When you play the videos, a captions symbol appears to the left of the settings symbol. Click or unclick the captions, depending on your preferences.
This was not a pleasant combing experience. So, I tried a different way. I flicked the solidified grease ends before combing. Combing the staples with the tip ends flick carded was a whole different experience.
A lot of gunk was left in the flicker and the floor was sprayed with gunk powder.
The combing was easy and pleasant after flick carding the tips and I was perfectly happy after my usual three passes. Pulling the wool off the combs was also nice and smooth and the spinning was uninterrupted and yummy.
I spun the skein above with both of the preparation techniques. Mostly the flicked version, though, since I only combed a couple of bird’s nests with the tips unflicked. I also knitted a swatch with the finished yarn.
Other ways to use a flick card
This was one example where flick carding the tips made a big difference for the preparation and spinning experience. I also use my flick card for several other purposes:
- To remove brittle tips. If I have a fleece with fine fibers and brittle tips I can use the flick card on the tip ends. The brittle tips will end up in the card instead of the yarn (as nepps).
- To flick both ends of a staple. Sometimes I want to spin from the lock. A flick card is a good tool to separate the fibers in individual staples and spin staple by staple.
- To tease staples before carding. This might take time, but will give a good result. Fibers that are too short, brittle or dirty will stay in the flick card and the good stuff will go to carding.
Do you use your flick card for other purposes?
In these videos I have played with both narration and captions. As you may know, I want to shoot my videos outside if possible. But the area around our house is quite noisy. In the background on the other side of the lake you can see the most intense motorway in Sweden, and it makes a lot of noise. Also, we live close to a city airport and the planes fly just above our house, it’s almost like we can tickle the planes on the bellies if we stretch enough. This is why I wanted to try to narrate the clips. And I think it worked out.
In a previous video where I tested my makeshift studio, I added equally makeshift captions. Since then, my editing software has upgraded with a function for closed captioning. Yay! I think they work too.
Please let me know if there is anything of the technical stuff I can improve.